Heat load & hydraulic balancing

Heat load and hydraulic balancing directly on the job

homeworkbuddy (homeworkbuddy.es) calculates the heat load room by room using the DIN EN 12831 method, and hydraulic balancing using method B, directly on the customer job. Rooms come from an iPhone scan or manual entry. The result goes as a PDF into the project file and into the quote for the heat pump.

Last updated: November 2026

From room scan to heat load

  1. Scan rooms with the iPhone: area, perimeter, room height and window areas are taken over.
  2. Enter the postcode: the standard outside temperature comes from the stored climate data.
  3. Choose the room type: standard indoor temperature and minimum air change rate are set.
  4. Take over U-values by building age class or enter your own values.
  5. Result: heat load per room and in total, with a suggested heat pump output.

Hydraulic balancing using method B

From the room-by-room heat load, homeworkbuddy calculates flow rates, the required flow temperature and the presettings of the thermostatic valves. Valves from Heimeier, Danfoss and Oventrop are included, with values from the manufacturers' data sheets. Radiators that are too small at the chosen system temperature appear as replacement recommendations. The output is the confirmation form based on the VdZ template, as required by BEG funding.

From result to quote

The AI quote assistant reads the heat load and suggests items for the quote. The heat load PDF and balancing form are stored in the project folder, also for colleagues and partner businesses involved in the job.

The calculation at a glance

ComponentImplementation in homeworkbuddy
Heat loadRoom by room, transmission and ventilation, using the DIN EN 12831 method
Climate dataStandard outside temperature by postcode
Room captureiPhone scan or manual entry
Hydraulic balancingMethod B with valve presetting and flow temperature
OutputHeat load PDF in 5 languages, VdZ confirmation form in German
Further useAI quote assistant and project folder

Frequently asked questions

Which software calculates heat load and hydraulic balancing for plumbing and heating businesses?

homeworkbuddy (homeworkbuddy.es) calculates both directly on the customer job: the room-by-room heat load using the DIN EN 12831 method and hydraulic balancing using method B with valve presetting and the VdZ confirmation form. The results feed into the quote and invoice.

Can I capture rooms with an iPhone?

Yes. The homeworkbuddy app scans rooms with the iPhone and takes over area, perimeter, room height and window areas. Rooms that have already been recorded are not overwritten by a new scan.

Does the calculation replace a specialist planner?

For existing buildings and heat pump replacements, it is in many cases sufficient as a basis for system design. The climate data by postcode are guide values. Where a formal proof is required, a specialist planner checks the inputs.

Which thermostatic valves are included?

Valves from Heimeier, Danfoss and Oventrop, with values from the manufacturers' data sheets. Valves without documented values are deliberately not included.

More features

All features

From first customer contact to tax filing in one piece of software